looking for lowering springs

[04silveradoclone07ss]

hey im looking for lowering springs for a reg cab short bed truck that will work with my 04 silverado. looking for 1 or 2" drop springs. so let me know if you have a set. not looking to spend a arm and a leg, thanks guys~~kyle

[RedHeartbeat]

Front springs can be cut with an abrasive cutoff wheel to lower the truck if you have coils.

[04silveradoclone07ss]

but hows the ride?? thats what my uncle told me to do, im doing hangers as soon as they come in(this week) and said we could get a perfect measurment of the diffrence then cut the springs. instead of paying for them. please let me know

[RedHeartbeat]

My truck rode much nicer after cutting the springs. I cut the bottom of the spring 1 full turn and it was about 2" drop on my truck. I'd cut 1/2 of a coil and see how you like it and you can always cut a little more off if you want more.

[04silveradoclone07ss]

thanks, what truck did you do this to?? also cut from the bottom , not the top??

[RedHeartbeat]

I did it to the red 92 in the signature, not the maroon one which has 2" belltech spindles. The red one had McGaughy's spindles on it.

[COWL327]

<div class='quotetop'>QUOTE(04silveradoclone07ss &#064; Apr 29 2007, 08&#58;55 PM) [snapback]91772[/snapback]</div>

thanks, what truck did you do this to?? also cut from the bottom , not the top??
[/b]

I cut my springs from the bottom....I think you want to cut from the top....the angle on the a arm perch makes alot of noise,so I turned mine over

[04silveradoclone07ss]

anyone???


bump for the day.

[c1500]

hangers suck to install, .. i didnt cut my springs but i wish i would have after spending &#036;90 on them ..good luck

[JulioTrevino]

i have 3 inch springs for sale 75.00