+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13

Thread: SARaceway results

Hybrid View

  1. #1
    Join Date
    Mar 2003
    Location
    San Antonio, TX
    Posts
    11,038
    First off pics and vids are coming soon, I didn't take any but several others did, so they'll be up very soon, btw thanks brandon.

    It was great seeing all you guys, we'll have to do it again.
    It was also a nice turn out, about 12 of us showed up. Everyone was running kind of slow becuase of the weather, but it was still fun, bill in his Radix ss busted a 14.0, so I'm still saying it's a high 13sec truck. If I was 3 tenths slower, he's def. a 13.9. MustbBrent ran pretty good too, he went thru in 14.9, no bad at all.
    I'll let the rest of you post your own results.

    I wasn't too sure about the kit I bought, I think the jets and sizing is way off, I put in a 100shot and it felt like a 50shot, so we put in the biggest ones, supposedly 150shot, still felt like it only added about 80hp.
    NA, I run a 13.6, usually I run a 13.3, so I was running slow, like everyone I have an excuse lol, it was muggy and hot, yes in december, lol.
    With the "150shot (ya right)" I ran a 12.56 @ 109, yes I'm very happy with it, but expected more. You'll see in the upcoming vids how my truck just dies in first for about .5 secs then starts going again, not sure what's going on there, but, hey jeff, remember when I picked up the maf, I bent one of those wires and maybe I messed it up, so I'll be replacing the maf soon.
    v8, keaven, I'll have to get that graneteli from you and see if that helps.
    I think with a 150 shot, I would have been in the low 12's, but I'm still happy with a 300 dollar mod, and dropped that much. that was with no tuning, just decreasing timing about 2degs.
    So, I guess I'll replace the maf, do some tuning, and see what's going on. That n2o seems a little addicting. Next up on the mods list, nelson ported heads and a big fat cam. So 11's should be in reach. Not sure if I'll stop there.


    later,

    allen

  2. #2
    Join Date
    May 2003
    Location
    Sunny San Diego,Ca.
    Posts
    151
    Sounds like you guys had a lot of fun. Going for 11's, huh Allen? It must be nice!!!! Congrats to everybody else on their runs,too
    00'ECSB 4.8L, Auto 4L60E with Fully adjustable TRANSGO shift kit with Superior billet servos, B&M tranny cooler, 4:10's,eaton posi, K&N Gen. 2,Thorley Headers, ASP Crank pulley, LT1 Fans, 3" catback single flowmaster 40 series exhaust, NELSON PERFORMANCE PCM BADASS TUNING, egr trim. Jantzer performance Ported TB, 20x9 MKW's, 2/4 drop.sold

    2006 GTO A4,HPE S+ cam,Volant, Kooks LT's, Magnaflow 3in.Catless cat back,3200 Fuddle converter,UDP. 7.49@93.57
    Coming up= Fast intake and heads.

  3. #3
    Join Date
    Mar 2003
    Location
    Florida
    Posts
    1,208
    how do you plan to solve that jetting size dilemma?
    Hugger Orange 99 SS Hardtop #756
    485rwhp/440rwtq SAE

    http://i83.photobucket.com/albums/j301/slmdls1/Signatures/hugger-prostar-sig.jpg

  4. #4
    Join Date
    Nov 2003
    Posts
    71
    Can't wait to see the pics and vids!!! Need to see myself get beat by that Radix once again!


    Because It Must Be Brent!
    --------------------------------------------------------
    2003 Victory Red Silverado SS
    14.64 @ 91.78 on a 2.16 60' time even with my big frame driving! (5445lbs)
    MODS:
    Nelson Performance Tuned / TransGo shift Kit w/ Corvette Servos / ASP Under Drive Pulleys / Flex-Lite E-Fans / FlowMaster HD Trucker / Thermo-Tec wrapped manifolds to X-pipe / 1.5" dropped using Belltech 6400 kit & 6.5 turns on torsion bars / Tinted Windows / Victory Red Spray in Bedliner / Drk Walnut Wood (steering wheel, console, and door inserts.)

  5. #5
    Join Date
    Sep 2003
    Posts
    62
    Hell yea that was fun!

    I got the tune, and then went to the track. My best was a 15.4, but shit, it was fun anyway.. as long as I beat that ricer that purged on me.. that made my day, i got a few pics and vid. it was fun.


    thanks allan for the tune, now i gotta go wash all the rubber off my quarter panel.

  6. #6
    Join Date
    Nov 2003
    Posts
    71
    Deckhand, that was a pretty fast little truck you got there. Sure sounded good. Great to meet ya.

    Till next time.


    Because It Must Be Brent!
    --------------------------------------------------------
    2003 Victory Red Silverado SS
    14.64 @ 91.78 on a 2.16 60' time even with my big frame driving! (5445lbs)
    MODS:
    Nelson Performance Tuned / TransGo shift Kit w/ Corvette Servos / ASP Under Drive Pulleys / Flex-Lite E-Fans / FlowMaster HD Trucker / Thermo-Tec wrapped manifolds to X-pipe / 1.5" dropped using Belltech 6400 kit & 6.5 turns on torsion bars / Tinted Windows / Victory Red Spray in Bedliner / Drk Walnut Wood (steering wheel, console, and door inserts.)

  7. #7
    Join Date
    Oct 2003
    Location
    San Antonio TX
    Posts
    118
    New best time for the little 4.8. It ran a 15.83@89.28mph.. Not too bad with the crappy air we had. 70% humidity. The LS1 cam helped out on top end. Had fun guys, we'll have to do it again.
    2003 RCSB 4.8L 5speed, BLACK
    3.42, AIRAID, loudmouth exhaust
    Nelson Performace Tune
    2000 vett cam
    160* stat
    et 14.80@94mph

  8. #8
    Join Date
    Oct 2003
    Location
    TeXas
    Posts
    932
    well i guess i better post before the vids come out! well me and farmtruc aka allen lined up by some chance lucky for me hahahaha well wasn't my best night since i only ran a best of 15.33 and a 15.34 against the allmighty allen and yes i did jump on him at the start but hey who wouldn't lol glad to meet everyone and lets do it again soon (march ???) hehehehhee later,kevin hey wheres the spell check button???/hahahhahaaa
    http://i17.photobucket.com/albums/b9...5831PM-2-1.jpg <--- TimeSlip
    RCSB 5.3 N/A 12.31 full boltons,H/C,4.10s,3800 converter. SOLD
    04 GTO
    Both Tuned By: ME

  9. #9
    Join Date
    Jun 2003
    Posts
    713
    damnit i had to work. when we do it again i will be there. cool beans allen i hope you get that worked out. hey mustbbrent hope you can use the pulley.
    04 supercrew 5.4 3 valve-magnaflow catback



    formerly 02denali 12.79@107

  10. #10
    Join Date
    Nov 2003
    Posts
    71
    Originally posted by 02Denali@Jan 3 2004, 05:04 PM
    damnit i had to work. when we do it again i will be there. cool beans allen i hope you get that worked out. hey mustbbrent hope you can use the pulley.
    Yes sir. And thank you.


    Because It Must Be Brent&#33;
    --------------------------------------------------------
    2003 Victory Red Silverado SS
    14.64 @ 91.78 on a 2.16 60&#39; time even with my big frame driving&#33; (5445lbs)
    MODS:
    Nelson Performance Tuned / TransGo shift Kit w/ Corvette Servos / ASP Under Drive Pulleys / Flex-Lite E-Fans / FlowMaster HD Trucker / Thermo-Tec wrapped manifolds to X-pipe / 1.5" dropped using Belltech 6400 kit & 6.5 turns on torsion bars / Tinted Windows / Victory Red Spray in Bedliner / Drk Walnut Wood (steering wheel, console, and door inserts.)

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts