+ Reply to Thread
Page 3 of 3 FirstFirst 1 2 3
Results 21 to 26 of 26

Thread: They Made Me Wear A Helmet

  1. #21
    Join Date
    Jan 2006
    Posts
    2,590
    <div class='quotetop'>QUOTE(jethro_3 &#064; Feb 12 2007, 09&#58;39 PM) [snapback]83098[/snapback]</div>
    Red can&#39;t get the link to work... probably my dial up

    Did the HP Calculator....

    Calculate HP from Trap Speed
    Vehicle weight in pounds (including driver)
    lbs 5150
    Trap speed at end of 1/4 mi in m.p.h.
    m.p.h. 97.51

    You are making :373 HP at the rear wheels and 440 HP at the flywheel*.

    *Note: Assuming a 18% drive train loss.
    Calculate HP from ET
    Vehicle weight in pounds (including driver)
    lbs 5150
    ET in seconds
    sec 13.84

    You are making :384 HP at the rear wheels and 450 HP at the flywheel*.


    I like the sound of those numbers
    [/b]
    THOSE ARE SWEET NUMBERS, NOW GET THAT TURBO ON THERE AND RUN 5 PSI, YOU&#39;LL MAKE AN EXTRA 100 HP. I WANNA RIDE AGAIN, DOES THIS MEAN I NEED TO BRING MY HELMET. HAA HAA&#33; GOOD TIMES&#33;

    JAMEST
    12 Sec. Club! SOLD
    La Viuda negra/ a.k.a. Black Betty

    LQ4 6.0L, WCCH HEADS, LEVEL 5 FLT 4L80E TRANS. WITH TRANS BREAK, YANK 3200 STALL, TRICK TURBO, TURBONETICS T-76 TURBO, CUSTOM INTERCOOLED, 68lb INJECTORS, CUSTOM S/D TUNE FROM NELSON PERFORMANCE, COMP CAM 212/214 .557/.559 116+2, SNOW METH. KIT, . ALL INSTALLED AND DYNOED AT NELSON PERFORMANCE: 5**?HP @ 5073rpms and 5**TQ @ 4389rpms AT THE WHEELS WITH 10 PSI OF BOOST. ALL 3/4 TON TRUCK 5435LBS, NOTHING TAKEN OFF, STREET TIRES, AND USUALLY 2 BABY SEATS. WANNA RIDE?
    SOLD***

  2. #22
    Join Date
    Nov 2006
    Location
    Plano, TX
    Posts
    230
    Sorry I missed you guys, those are all great runs, Daniel you&#39;re going a lot faster than I thought you would and Jeff MAN 13.8 that&#39;s just awesome. I ran a 14.47 with an extra 180-lbs in luggage.

    Really looking forward to doing this again&#33;

    Mr. P.

  3. #23
    Join Date
    May 2006
    Location
    Waco TX
    Posts
    3,113



    <div class='quotetop'>QUOTE(Mister P &#064; Feb 13 2007, 01&#58;26 PM) [snapback]83156[/snapback]</div>
    Sorry I missed you guys, those are all great runs, Daniel you&#39;re going a lot faster than I thought you would and Jeff MAN 13.8 that&#39;s just awesome. I ran a 14.47 with an extra 180-lbs in luggage.

    Really looking forward to doing this again&#33;

    Mr. P.
    [/b]

    Thanks. I had 3 14.2xx runs at Ennis. I almost pulled off a 14.1x when I ran my 14.209. Get rid of your 180 lbs of luggage and find your right stall PRMs at launch and youll be right with me if not better.
    DANIEL CAMMED SS 13.46 @ 98.17-- 8.58 @ 80.31

    2003 Silverado SS / LQ9 6.0L / Wheatley 93 Octane Tune / 224/228 .581 .588 110lsa / Patriot Gold Dual Springs / Comp Hardened Push Rods / Circle D 3800 stall / Pacesetter LT's / 4:10 Gears / Transgo HD-2 Shift Kit / K & N Cold Air Intake / Corvette Servo / Aeroforce Interceptor / Autometer Narrorband(Wideband on the way) / Mobile 1 Synthetic / Single Chamber Flows with X Pipe / Cats Delete with Cutouts


  4. #24
    Join Date
    Jun 2005
    Location
    Round Rock
    Posts
    1,517
    Thanks Mister P... soon, soon

  5. #25
    Join Date
    Nov 2006
    Location
    Plano, TX
    Posts
    230
    <div class='quotetop'>QUOTE(Red03SilSS &#064; Feb 13 2007, 03&#58;30 PM) [snapback]83168[/snapback]</div>
    Thanks. I had 3 14.2xx runs at Ennis. I almost pulled off a 14.1x when I ran my 14.209. Get rid of your 180 lbs of luggage and find your right stall PRMs at launch and youll be right with me if not better.
    [/b]
    Well yeah I just left from a 650-rpm idle; but I&#39;m not so sure that&#39;s all - my MPH at the finish line was only 91mph, a lot of the other similarly modded guys were crossing the line in the 93-94+ mph range, and my 1/8-mi times/speeds were the same as they so I&#39;m wondering if I&#39;m loosing a bit on the top-end in 3rd gear??? I&#39;m wondering if maybe I should turn on the TCC in 3rd as well as launch from 1500-rpm...

    I&#39;m working on eliminating my rear-end vibration now, then I need to join you at Temple.

    Mr. P.

  6. #26
    Join Date
    May 2006
    Location
    Waco TX
    Posts
    3,113
    <div class='quotetop'>QUOTE(Mister P &#064; Feb 15 2007, 02&#58;11 PM) [snapback]83359[/snapback]</div>
    Well yeah I just left from a 650-rpm idle; but I&#39;m not so sure that&#39;s all - my MPH at the finish line was only 91mph, a lot of the other similarly modded guys were crossing the line in the 93-94+ mph range, and my 1/8-mi times/speeds were the same as they so I&#39;m wondering if I&#39;m loosing a bit on the top-end in 3rd gear??? I&#39;m wondering if maybe I should turn on the TCC in 3rd as well as launch from 1500-rpm...

    I&#39;m working on eliminating my rear-end vibration now, then I need to join you at Temple.

    Mr. P.
    [/b]

    Sounds good. Are you always running on 93 octane? That would make a difference. It could also be how agressive your tune is. Temple would be cool. There is another truck shoot out in about a month. 100 bucks to the winner.
    DANIEL CAMMED SS 13.46 @ 98.17-- 8.58 @ 80.31

    2003 Silverado SS / LQ9 6.0L / Wheatley 93 Octane Tune / 224/228 .581 .588 110lsa / Patriot Gold Dual Springs / Comp Hardened Push Rods / Circle D 3800 stall / Pacesetter LT's / 4:10 Gears / Transgo HD-2 Shift Kit / K & N Cold Air Intake / Corvette Servo / Aeroforce Interceptor / Autometer Narrorband(Wideband on the way) / Mobile 1 Synthetic / Single Chamber Flows with X Pipe / Cats Delete with Cutouts


+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts