+ Reply to Thread
Results 1 to 7 of 7

Thread: Fully Built 4l65e 4wd

  1. #1
    Join Date
    Feb 2005
    Location
    Austin, Texas
    Posts
    2,053
    It just got a fresh rebuild by the local builder that builds for all the hot rods around here. It has EVERYTHING the big trans builders put in their top-of-the-line 65es, even the hardened output shaft, Ill try and list everything that was put in it but Im sure I wont get it all.

    Started life as a 2001 4l60e 4wd, blew the 2nd gear band in it when it was stock and went all out on the rebuild

    5pinion planetaries
    tq drive kit(hd input drum and input shaft)
    Trango HD2 shift kit
    Vette servo
    pinless accumulator piston
    Alto Red Eagle clutches(except 3-4 which has the "Z-pack" clutches)
    Beast Sunshell
    Various cry-treated parts(dont remember right now builder sent them off)
    Borg Warner HD Sprag
    New Solenoids
    All new bushings

    Thats all I can think of there may be a couple other things. To be clear this is NOT a new transimission all parts have 9K on them behind a bolt on 5.3 with a 100shot and 3K behind my N/A 418 which was babied for the most part due to issues with the motor. I blew the 3-4 clutch pack so thats why it is a different clutch which is suppose to be a "better" design then the alto clutches for the 3-4 clutch pack. This trans sells for 3K brand new and Im pretty realistic so Im going to start off by asking 1800shipped to you, I will entertain offers, or if someone has a 4wd 80e laying around. The trans was gone through about a month ago to make sure everything was in good working order and replace the clutch pack in preperation to go behind my 418 again but I bought a turbo kit and I plan on spraying it so I dont think it has a chance to live even being fully built in my heavy truck. I figure I can get more money out of it in good working order then selling it with a blown whatever. I guarantee it to be in good working order and to have the parts listed. Thanks for reading the book just want everyone to know what they are buying
    2007 CCSB Z71 VortecMax: Stock!

  2. #2
    Join Date
    Dec 2006
    Posts
    47
    Would you consider shipping to Canada?
    That which does not kill usually hurts a lot!

    The Hoe's humble beginings.

  3. #3
    Join Date
    Feb 2005
    Location
    Austin, Texas
    Posts
    2,053
    Sure, if you can find a freight company that will pick it up on a pallet, we can figure out the shipping thing. Im ready to buy my built 80e so Im will to work with you/anyone.
    2007 CCSB Z71 VortecMax: Stock!

  4. #4
    Join Date
    Feb 2005
    Location
    San Antonio Tx
    Posts
    554
    dammit I wish I saw this sooner

    Is there any kinda warrenty that comes with it? and who built it?
    02 Chevy EcSb Z71, 5.3, Helix Tb Spacer, AEM Brute Froce Intake, Msd 8.5 wires, NGKTR55 IX, B&M 25k Trans Cooler, Hypertech 160, Nelson Tune, Nelson Harness & Ls1 fans, Fully Built tranny, tb2600, 216/224 551/551 115LSA, yeller z06 springs, magnaflow, cut-out, hi-flow cats, etc...

  5. #5
    Join Date
    Feb 2005
    Location
    Austin, Texas
    Posts
    2,053
    I dont know I would have to ask him. Since your local I would be very willing to work on the price. I dont think its warranteed through him but he would fix it for the cost of parts Im sure. His name is Rick, he builds transmissions on the side for all the hot rod guys here in Austin and is well known and recommended by Austin Performance and reptty much everyone else thus I got him to go through it.
    2007 CCSB Z71 VortecMax: Stock!

  6. #6
    DBYRD Guest
    hey cody u might try to work a deal with daniel as he has been asking about upgrading his tranny lately and since ur doing his cvam maybe u can do it while ur here... just a thought

  7. #7
    Join Date
    Feb 2005
    Location
    San Antonio Tx
    Posts
    554
    If mine wasnt 75% done from the rebuild id buy this in a sec from you...
    02 Chevy EcSb Z71, 5.3, Helix Tb Spacer, AEM Brute Froce Intake, Msd 8.5 wires, NGKTR55 IX, B&M 25k Trans Cooler, Hypertech 160, Nelson Tune, Nelson Harness & Ls1 fans, Fully Built tranny, tb2600, 216/224 551/551 115LSA, yeller z06 springs, magnaflow, cut-out, hi-flow cats, etc...

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts