I am installing an air fuel ratio gauge and was wondering, which wire do I splice into to recieve the signal on the o2 harness?
I am installing an air fuel ratio gauge and was wondering, which wire do I splice into to recieve the signal on the o2 harness?
2000 Chevrolet Silverado, 4.8L, K&N polished intake, 4.10 gears, 20x9 KMC SS on front, 22x10 on rear, Dual style pillar gauges, steel cowl hood, 2" rear drop shackles, true duals w/IMCO extreme mufflers w/dumps at rear end, SLP headers. Cam and nelson tune soon to come!!!!!
I found this on another message board.
he says violet
http://www.clubavalanche.com/forums/index....topic=3961&
05 RC, LME 6.0, 243 Heads, LSA Rods, 11:25 Forged Pistons, Cam Motion Custom Grind, 4:10, Eaton LSD, Narrowed Rear-end w/ Chromoly Axles, Pacesetters LT's, SLP Loudmouth II Mufflers, Volant CAI, Yank SSTB3600, Bosch 42 lbs inj's, G-Force Tune, FLT Level 4 Trany, Belltech 2/4, Times: ?
I tried to put one in mine, I spliced into every wire trying to find the right one, because I didn't have a wire diagram at the time, and it didn't function properly on any of them. But it should be the purple one on an 04. Hope you have better luck than I did.
2004 Chevy/Regency RST, 6.0L LQ4, custom built NV MG-5 tranny by local Tranny Guru, Hurst Shifter, K&N FIPK, stock Regnecy Exhaust, 3.73 gears w/ Eaton Locker, and the Magnacharger huffer topping it off w/ stock pulley... for now
Looking to meet people w/ LS1 trucks in the OKC area PM me
<div class='quotetop'>QUOTE(daredevil350 @ Dec 11 2006, 06:46 PM) [snapback]76031[/snapback]</div>Thanks manI tried to put one in mine, I spliced into every wire trying to find the right one, because I didn't have a wire diagram at the time, and it didn't function properly on any of them. But it should be the purple one on an 04. Hope you have better luck than I did.
[/b]
2000 Chevrolet Silverado, 4.8L, K&N polished intake, 4.10 gears, 20x9 KMC SS on front, 22x10 on rear, Dual style pillar gauges, steel cowl hood, 2" rear drop shackles, true duals w/IMCO extreme mufflers w/dumps at rear end, SLP headers. Cam and nelson tune soon to come!!!!!
Posting Permissions
Reply With Quote
