Fri Nov 3rd SAR New Bests!

[Jamest]

WELL I TALKED TO DAVE AT YANK AND THEY ARE GOING TO BUILD ME A ONE OFF 11 INCH WITH A BILLET FRONT. IT WILL BE SIMILAR TO THE 2600 IN THE 4L60E OR 4L65E, JUST A LITTLE STRONGER. SHOULD BE ABLE TO PULL UP TO 2600 AT THE LINE. THE OLD ONE IS GOING BACK FOR CREDIT. SCARY POWER AT TAKE OFF. I AM READY- I WANT HIGH 12S OR LOW 13S.

JAMEST
<div class='quotetop'>QUOTE(Jamest &#064; Nov 4 2006, 07&#58;38 AM) [snapback]72161[/snapback]</div>

WELL THE TRUCK DIDN&#39;T RUN AS WELL. THE STALL WOULD NOT STALL UP PAST 1800 RPMS YANK 2600, BUT PULLS LIKE A MUTHER ONCE IT GETS UP THERE. THE TIRES START TO BREAK LOOSE A LITTLE WHEN FULL BOOST AND METH KICKS IN. ANYWAY, LETS JUST SAY 3/4 ton 5435lbs STOCK STALL, TAILGATE IN TACT, SPARE TIRE UNDER TRUCK, BED MAT IN TRUCK, AND BABY SEAT IN BACK, ANYONE WANT A RIDE-THE BABY SEAT IS OPEN FOR TRACTION PURPOSES.

TIME 14.2 @ 104 mph NEED TO CLEAN UP THE 60 FT-2.48, A NEW STALL WILL TAKE CARE OF THAT.

OTHER THAN THAT WE ALL HAD FUN&#33;

JAMEST
[/b]

[jethro_3]

<div class='quotetop'>QUOTE(OUT2WIN &#064; Nov 5 2006, 04&#58;25 PM) [snapback]72303[/snapback]</div>

Some fast trucks running down there&#33;

I am just wondering if this one is on 20s? What was the 60&#39;?
[/b]

Factory "Boat Anchor" 20&#39;s.... 60&#39; was 2.134

Hopefully I will get that thing to 13.99 before I go FI

[Jamest]

<div class='quotetop'>QUOTE(jethro_3 &#064; Nov 6 2006, 06&#58;22 PM) [snapback]72418[/snapback]</div>

Factory "Boat Anchor" 20&#39;s.... 60&#39; was 2.134

Hopefully I will get that thing to 13.99 before I go FI
[/b]

GO A HEAD AND PUT THAT FI ON THERE, INSTANT 12&#39;S

JAMEST

<div class='quotetop'>QUOTE(jethro_3 &#064; Nov 6 2006, 06&#58;22 PM) [snapback]72418[/snapback]</div>

Factory "Boat Anchor" 20&#39;s.... 60&#39; was 2.134

Hopefully I will get that thing to 13.99 before I go FI
[/b]

GO A HEAD AND PUT THAT FI ON THERE, INSTANT 12&#39;S

JAMEST

[jethro_3]

I am going to get a "Track" 13.99 with cam, tune and stall.... ok and a few small tricks, no heads.

Anyone have some 6 lug drag slicks I can put on at the track??? Also looking at some shorty headers and a cat back exhaust. I do not want to weld the exhaust and do not have the money to waste for a LT header bolt ons if I go FI.

[OUT2WIN]

Your truck runs pretty damn good Jethro. I can only get a 14.50 out of the factory 20s. I am hoping cam/stall will put me in the mid 13s with et streets and high 13s on 20s.

[jethro_3]

Stock was 15.31, tune gave me 14.72, added cam resulted 14.45, added the stall to get 14.14. I know she has a little more in her

Thanks