LS1 fan bracketry

[jethro_3]

You've seen my small pictures..... just get a metal shop to cut a 1/8" thick 1" wide 6" long starp and get your drill out. If you get fancy cut the top of the strap to match the angle on the radiator wall and have them smooth out the edges... follow with paint and people will think you have a stock set up with that nice wire loom Allen made.

[BlenderWizard]

<div class='quotetop'>QUOTE(jethro_3 &#064; Nov 4 2006, 02&#58;11 AM) [snapback]72152[/snapback]</div>

You&#39;ve seen my small pictures..... just get a metal shop to cut a 1/8" thick 1" wide 6" long starp and get your drill out. If you get fancy cut the top of the strap to match the angle on the radiator wall and have them smooth out the edges... follow with paint and people will think you have a stock set up with that nice wire loom Allen made.
[/b]

I did see those, but I was unsure of how the brackets attached to the fans themselves.

Holy Crap&#33; I got my harness from Allen yesterday, and Holy Crap&#33; I was expecting something much simpler (i.e. less intricate). Very nice&#33;