Farmtruc: Thank you. I will get that wiring done. But do I need a different bcm or can mine be reprogrammed. If I do get a new one, will it need to be reprogrammed for my truck and can a tuner do it?
Farmtruc: Thank you. I will get that wiring done. But do I need a different bcm or can mine be reprogrammed. If I do get a new one, will it need to be reprogrammed for my truck and can a tuner do it?
Last edited by xtrooper89; 09-21-2015 at 08:12 PM.
Update: I tried to do what farmtruc suggested but ran into a wiring question.
I was able to wire the 3 wires to C100 and 1 wire verified light blue at C1 F9 from the original drive by cable cruise control module connector.
Then I tried to do what "farmtruc" mentioned but some wires have been wired different than the 5.3 schematic/ connector diagram states.
C2 F11 has a large gauge yellow wire where the park neautral wire dark green is said to be located. It is currently not in my C2 connector. Also, the D12 yellow/black wire for the starter relay was not plugged into its spot but a pin was installed and wired directly to ground. When I replaced the grounded wire with the called for yellow/black wire I get a no start.
Can a wiring expert please chime in to help me out. Thank you in advance!
More photos to show my swap is quality (despite no cruise control or starting in any gear):
Posting Permissions
Reply With Quote
