Just an update the swap is done and it is running, i am having a small issue i believe to be wiring related, started it up (FIRST TRY i might add) surprised my self to be honest because i had never done a swap like this before but its throwing me out a p0200 (injector circuit malfunction) and p0300 (random multiple misfire) know i know that p0300 can be caused by p0200 so i am trying to sort that out i have tried swapping parts (coil, plug, plug wire) nothing seems to change it but at random it will switch from number 6 misfiring ALOT to numbers 2 and 8 and then 6 is fine, i have wiggled wires checked grounds(although im still not convinced i didnt miss one) checked grounds at pcm everything i can think off anyone with any advice even if its bad advice i would be grateful