Show me your Engine Bay.

[Big-Sexy907]

I have the lq4/4l80e in the truck, on new mounts, and was looking at options on installing the relays and wiring harness that I received from Nelson Performance. I'd like to keep the bay as clean as possible and wanted to see what some of you fellas did to keep the engine bay clean as possible.

I will be running dual E fans, the Nelson Harness, and the truck is missing the stock fenders since it is bagged, and will be body dropped in the future.

[12thstreetjunkman]

Here's mine, PCM in the dash in stock location, nbs e-fans.

[Blasphemy]

I have the lq4/4l80e in the truck, on new mounts, and was looking at options on installing the relays and wiring harness that I received from Nelson Performance. I'd like to keep the bay as clean as possible and wanted to see what some of you fellas did to keep the engine bay clean as possible.

I will be running dual E fans, the Nelson Harness, and the truck is missing the stock fenders since it is bagged, and will be body dropped in the future.

Doing a body drop is some serious work, I'd like to see your build thread on that one when you get it going. An engine swap is a walk in the park compared to that!

[Big-Sexy907]

Clean setup, I would love to put the LS ECM inside the cabin but I can't find a suitable place to hide it.

[gagliano7]

Not the best picture. Click on for a better view.

[Blown06]

What the hell, I'll contribute

[GreyChevy]

Here's mine, PCM in the dash in stock location, nbs e-fans.

What coldair intake is that?

[TXsilverado]

am I the only carbed truck on here?