Hi and welcome to the site. I too did a '93 swap with a 4L60E so I wouldn't have to mess with the driveshafts(4X4). You have to use a newer transmission, I believe a '96 or '97 up because the interior wiring was changed from that of the older design. If you rewire the older trans, it should work from what I have read.


Check out this site: http://lt1swap.com/
Lots of information here and without it, my swap wouldn't have been too successful.

Here's a link about the A/C bracket. I used this setup and it works. http://www.maliburacing.com/forum/vi...p?f=34&t=79059