Nelson engine harness

[Blasphemy]

no problem at all.

once you have removed all the misc wiring and sensors that aren't needed; in short, YES.
I like to separate and group certain sensors together, but if you were to take all those pink/ignition wires and take them to a single 12g wire, it would work.
Just use the correct fuse.

Suggestion:
Take the pcm ign to it's own source.
Group maf and o2's together
injectors on their own wire
coils on their own wire

just a general suggestion, by no means is this the correct or wrong way, it just might help if you need to diagnose why the engine isn't starting.

Thanks so much for the help!! Your tuner did the initial flash on my PCM to get me up and running and once I feel it's driveable I'm coming down to your shop to do the last final tweaks. Please don't laugh at my wiring job, it's my first LSx swap and it's definitely a large learning curve haha.

[Roy@NP]

bump