It really boils down to the bolt pattern and output spline count/length. In the past I've gone to the junkyard to find things similar to what I'm working on and torn them apart to get a better idea of what I'm dealing with. A little extreme I know but it has almost always worked out in my favor. Advance adapters is also a place for info and questions and they might even have the parts you may need. I want to say yes it will bolt up but I'm not 100% sure. Also, check offroaddesign.com, there's a ton of useful info on there too. As far as engine brackets go, I'm using Dirty Dingo adjustable mounts and I couldn't be happier with them. They made the engine installation a breeze while using the stock GM clamshell mounts. I think you can post pics by pasting the img link from a photobucket (or similar) account. I have an iPad so I just post my pics using the "manage attachments" button at the bottom of your post page