Quote Originally Posted by darnie1987 View Post
what are u spraying for meth? Im not running any at the moment. running 14psi think im 615-620 hp now and around 675 tq. I was at 600/656 on 12.5 psi. Been debating meth but that's one more issue that could go wrong? thoughs? how much you think id gain if I did? Im running stock head studs tho too
I used a Devils Own kit with dual nozzles. #3 and #7 nozzle which flows a lot haha. Its a cheap upgrade like $350-$400. Although I could build my own- now that I know what goes into it- for very cheap like $200.

So a few things to keep in mind. Water cools the cylinders far better than additional fuel which helps prevent detonation. The methanol resists detonation better than gasoline and has a higher octane. So now you have a higher octane, cleaner burning, air fuel mixture that allows for more timing. So with proper tuning you can expect a fair gain in power.

With a similar kit to mine, I would expect similar gains to what I had. keep in mind my tune is very safe for what I have in the motor- trans is my weak point.