help with a tuning questions

[chvy=power]

and you have the right tune file in the pcm right?

[nettles]

and you have the right tune file in the pcm right?

I have not done that and yea its the stock file from the truck it all came from.

[chvy=power]

run it open loop and see what your o2 readings are

[nettles]

I will try this, and the dang O2 readings were actually in he green on the vc scanner if I remember right.

[chvy=power]

what did your fuel trims look like?

[nettles]

green also if I remember. Its in the teens here temp wise today so I wont be tinkering with is lol when I do I will let you know and also I noticed that the dang oil system does not want to prime. It is a 30k motor out of a total but it was drained of oil and stored for 8 months... I started it and it ran for a minute or so then I noticed the oil pressure never came up so I shut it off. I have to get oil pressure before I figure out the fuel I guess lol