01 lq4 6.0 from yukon bracket accessory kit

[Chevydillan]

I actually just found the full bracket kit st summit I just have to use a r4 type compressor. Its not bad the kit is only 360. Moves the ac compressor up along with the Alt and PS pump. It makes the engine bay look a little more semetrical from side to side.

If you going the route of not trying to use the LS compressor then just get the lextech kit and use an original Delphi compressor and all the lines that originally went to your 98. The r4 is not as good as the 98 compressor and you'll be able to just get all the factory stuff to keep the ac. Lextech's kit is cheaper anyway.


As for headers use the shoenfields
http://www.jegs.com/i/Schoenfeld/649...FQqCfgodjKAAVA

[Chevydillan]

Here you go

http://www.ls1truck.com/forums/lsx-t...acket-kit.html

[capricefrk013]

Lextechs kit is really nice and easy to install. Here is my install with it.







The belt #'s he listed in the kit instructions are the same interchange #'s for a Gates belt and it fit perfectly. I think I may need to get a new tensioner for mine.