You most likely need to change a parameter in the tune . Here is a snap shot from hptuners. The tach resolution needs to be changed to make your tach work. My high and low resolution are set to 3 for mine to work correctly.
You most likely need to change a parameter in the tune . Here is a snap shot from hptuners. The tach resolution needs to be changed to make your tach work. My high and low resolution are set to 3 for mine to work correctly.
Here's what I did
Tach can be seen in operation here.
www.youtube.com/watch?v=8pqNuuCdePI
95 C1500 LM7, built 4L60e, Circle D 3200, LT's, Nelson tune, open differential, 3.42, and LS1 e-fans. Tractionless
That's what I posted just with a 680 ohm resistor instead of 1000.
Thanks I'll try this one.
97 RCSB . 2WD . 5.3 . 4l60E . E-FANS . PNP 706s . TSP 228R . 3600 STALL . HD2 . VETTE SERVO . 3.73s . 2" DROP
TURBO IN THE WORKS
Posting Permissions
Reply With Quote
