check the stickies and grab wiring diagrams. tons of info on here that explains it. tac needs resistor and pcm needs to be tuned for correct signal along with segment swap for 80e
check the stickies and grab wiring diagrams. tons of info on here that explains it. tac needs resistor and pcm needs to be tuned for correct signal along with segment swap for 80e
Like Tumbler in "Gone in 60" I'll drive anything with wheels or without
My 95 ECSB LQ9 build thread - http://www.ls1truck.com/forums/lsx-t...to-95-obs.html
CALI LEGAL ENGINE SWAP!
Stock 03 LQ9, DBW, 95' 4l80e w/ Transgo shift kit, 2010 50# GM injectors, 2800 Circle D stall, Spectre CAI, Upgraded trans cooler, Home-made E-fans/shroud, Dual EP-381 fuel pumps w/Home-made hotwire kit
NEXT ON LIST: Dual Battery setup, CAM/Valvetrain upgrade, Build my own rear mount turbo, TRU-TRAC, HIT THE STRIP!!!
Posting Permissions
Reply With Quote