88-95 obs return less fuel system parts (i need help)

[kewljay223]

this question has been answered numerous times on this site. in fact, its in the 2nd post in the STICKY.... i suggest you read through it. it answers both of your questions and many more you will have.
http://www.ls1truck.com/forums/showt...4782#post74782

http://www.ls1truck.com/forums/showt...046#post520046

[LOWnEASY]

I'm sorry, I meant use the return line. Not return less. I don't want to go with the vett filter.
It seems a cheaper rout to only buy two fittings and use the stock filter and lines.
Editing first post.

[LOWnEASY]

Think I found what is was looking for. And for any one els have the same question, here's a link
http://www.fullsizechevy.com/forum/g...-obs-95-a.html

[gagliano7]

If you don't use the corvette filter you will need a regulator to get the proper psi.

[silverado_lover]

Pulled this img from the second link



I'm the guy who made the diagram, don't know why the hell the guy though it was 98 only

[LOWnEASY]

I was under the impression that the corvett filter held a regulated pressure of 58, and the stock fuel rails regulat that down to a lower 5x psi.