+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 19

Thread: What do I do with this wiring?

Hybrid View

  1. #1
    Join Date
    Mar 2013
    Location
    Long Beach California
    Posts
    637
    Like Tumbler in "Gone in 60" I'll drive anything with wheels or without

    My 95 ECSB LQ9 build thread - http://www.ls1truck.com/forums/lsx-t...to-95-obs.html
    CALI LEGAL ENGINE SWAP!
    Stock 03 LQ9, DBW, 95' 4l80e w/ Transgo shift kit, 2010 50# GM injectors, 2800 Circle D stall, Spectre CAI, Upgraded trans cooler, Home-made E-fans/shroud, Dual EP-381 fuel pumps w/Home-made hotwire kit
    NEXT ON LIST: Dual Battery setup, CAM/Valvetrain upgrade, Build my own rear mount turbo, TRU-TRAC, HIT THE STRIP!!!

  2. #2
    Join Date
    Aug 2011
    Location
    Ellsworth Air Force Base, SD
    Posts
    143
    Ok that link really helped out, thanks kewljay. I discovered that those wires go to my cruise control switch.



    Now, if anyone has information on the other 2 wires on that battery generator thingy, I would greatly appreciate it.
    1994 Chevy C1500 RCSB 05' DBW 5.3 Conversion Complete
    My build

    Coming soon ....... Full Repaint, 214/220 Cam, Yukon Posi with 3.73's, remove body lift

  3. #3
    Join Date
    Sep 2009
    Location
    NE Ohio
    Posts
    211
    I can look up some info on alldata for you.
    Been lurking since 09 and I finally have my kickass 6.0 LQ4
    LQ4 LQ9 6.0L Engine Service Manual Save to your computer in case it disappears


  4. #4
    Join Date
    Sep 2009
    Location
    NE Ohio
    Posts
    211
    What model did this motor come from? What is the 8th vin number from donor vehicle?
    Been lurking since 09 and I finally have my kickass 6.0 LQ4
    LQ4 LQ9 6.0L Engine Service Manual Save to your computer in case it disappears


  5. #5
    Join Date
    Aug 2011
    Location
    Ellsworth Air Force Base, SD
    Posts
    143
    Thanks brother, I appreciate your help. Here is the printout from the donor.

    1994 Chevy C1500 RCSB 05' DBW 5.3 Conversion Complete
    My build

    Coming soon ....... Full Repaint, 214/220 Cam, Yukon Posi with 3.73's, remove body lift

  6. #6
    Join Date
    Sep 2009
    Location
    NE Ohio
    Posts
    211
    Generator battery control module. That is what is around the negative battery cable.
    Been lurking since 09 and I finally have my kickass 6.0 LQ4
    LQ4 LQ9 6.0L Engine Service Manual Save to your computer in case it disappears


  7. #7
    Join Date
    Aug 2011
    Location
    Ellsworth Air Force Base, SD
    Posts
    143
    It's a module of some sort with a 10 pin connector



    The numbers on the top of the module read 15137027

    The bottom reads RVGB 621375
    1994 Chevy C1500 RCSB 05' DBW 5.3 Conversion Complete
    My build

    Coming soon ....... Full Repaint, 214/220 Cam, Yukon Posi with 3.73's, remove body lift

  8. #8
    Join Date
    Sep 2009
    Location
    NE Ohio
    Posts
    211
    http://www.lt1swap.com/2004vortec_pcm.htm

    Scroll all the way to the bottom and look at pin 74 and the green box. Need to do more digging on deleting it and possibly tuning out the DTC code for it if you get rid of the module.
    Been lurking since 09 and I finally have my kickass 6.0 LQ4
    LQ4 LQ9 6.0L Engine Service Manual Save to your computer in case it disappears


  9. #9
    Join Date
    Sep 2009
    Location
    NE Ohio
    Posts
    211
    I dont think those 2 wires are for that module. They are not even in the diagram.

    Attached Images
    Been lurking since 09 and I finally have my kickass 6.0 LQ4
    LQ4 LQ9 6.0L Engine Service Manual Save to your computer in case it disappears


  10. #10
    Join Date
    Aug 2011
    Location
    Ellsworth Air Force Base, SD
    Posts
    143
    My pin 74 is there along with 75. It's hard to read that block. Not sure what to do with it, the guide says rewire alternator gray here which is already there on my C2. I think that the diagram on lt1swap is talking about pin 75 on that. It's in a weird excel format. When I copy and pasted it to excel, it reads like this

    1994 Chevy C1500 RCSB 05' DBW 5.3 Conversion Complete
    My build

    Coming soon ....... Full Repaint, 214/220 Cam, Yukon Posi with 3.73's, remove body lift

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts