What do I do with this wiring?

[Bear]

Aright, got the newer harness graphed with the old truck wiring. I have a couple of wires left that I need help with. First are the wires from the C2 underhood fuse connector, D3 L-GN 275 Park Neutral Position Switch Park Signal, and F11 D-GN 1433 Park/Neutral Start Switch Signal. Do I need these wires, if so, where do I graph them too? Second is also from the C2 underhood fuse connector, A11 GY 1524 Trailer Backup Lamp Supply Voltage. Does this need to be graphed into my harnes for reverse lights?

[Bear]

Ok got my answer from Brendon over at LT1swap. All 3 of these wires are not needed. The 94 already has a park neutral safety built on the column. The trailer backup is also on the column and can be removed from the harness. Also, I have aquired a pinout for the instrument cluster, this really helped in tracing out wires to make my guages work that I will post on my build thread.