Prepping for the conversion

[Zero]

I have a 92 silverado 4x2. It's currently 5 lug all the way around disc in front drum in rear. Buying a new posi rear end with disc brake out of a 01-05 silverado and updating the front as well to match. I'm going from a 4.3 mounted to 700r4 and I'm putting in the ls3 mounted to a ford tremec 5 speed. I have considered finding a 01-02 camaro as 6 speed but decided to go the other route since the 5 speed transmission is cheaper.

[blacstar]

gonna need another bell housing for that ford trans. is it a t-5 or t-45? (your trans input will determine the proper flywheel and clutch)
what year stang? did you want a cable clutch or hydraulic? gonna need a drive shaft adjustment.
what engine harness are you going to use?
you may need to throw in some mopar parts to keep it all original!!

[Zero]

I'm pretty sure I can pull the bell housing off of my 700r4 to put on the other trans. The trans is a t-5 coming out of a 01-03 mustang. I would like to go hydraulic for the trans. I'm going to buy a long heel base drive shaft to have it cut down to fit. I'm gettin a custom harness from psi .