If u got the time for it then I congradulate you. You will be there for days rewiring it. Try getting a 2nd harness and use those wires to lengthen what needs to be. Then solder, double heat shrink with waterproof marine heat shrink tubing. Then tape up wires with good quality electrical tape and wire loom.
Good luck on your project, if you need any pigtails, fan harness, ect. feel free to contact me via email at "roy@nelsonperformance.com" or give us a call at (210) 626-0278 also we offer a show quality engine harness if you are interested in purchasing a new harness
You can use 18ga priary wire that can be found at napa.
Back Alley Motorsports 98 GMC
-5.3l LM7 bored to 5.7l Thompson Motorsports -72mm T4 Magnum Turbo
-TU1 Custom Grind cam(spec speed.inc) -799 heads
-.660" Trick Flow dual valve springs -Forged Probe Pistons 3.902" flat top
Posting Permissions
Reply With Quote