siemens deka 80lb injectors?

[ShredSled]

Angling on each side is normal, but all depending on HOW much they lean! Just a little...
Solid spacers are a must! When you make the spacers, keep in mind that as they get taller and grow in height, they will also have to move slightly in the direction of the angle lean so the injectors aim straight down their bore, otherwise yeah you'll be spraying the walls.
I had similar issues with a set of racetronix injectors, but I think yours are even taller.

Also, it sounds like you have the wrong o-rings. They should spin if forced, but definitely not too easily.

Check all the o rings I just went through!

[darnie1987]

great info thanks man, im going to just order some new orings. the ones i got a gm ones they are black not sure the part number. im going to mess with this on my next days off. last night i took the broken rail out and installed the new stock one i got, and though everything was good but the back two injectors were leaking alittle were the injector meets the rail. does anyone have any pictures of how they have there spacers and what the angle of the injectors should look like.

[juliaroberts981]

I found spinogambino casino through a Reddit thread about online casinos available in Canada. I was curious because everyone mentioned the unique bonus features. I tried one of their high-volatility slots and nearly quit after losing a few rounds, but then came the big turnaround — I landed the bonus symbols and multiplied my bet 20x. The adrenaline rush was real. What I liked most was how quickly the withdrawal came through — no endless waiting.