+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 18

Thread: Seats? What ya running?

  1. #1
    Join Date
    Feb 2010
    Location
    Memphis,TN
    Posts
    41

    Seats? What ya running?

    Anyone here done seat swaps or recovers or anything like that?

    I'm looking at either recovering the seats with www.leatherinteriors.com or swapping the seats out completely. Just cant make up my damn mind. I keep seeing all these Tokyo drift looking seats on Ebay and they are god awful looking. Every other option seems to be an equally used set of stockers, or an 07-13 set of leather from like a Tahoe. But I cant seem to get a straight answer about the tracks fitting properly.

    Also, going to power from a manual seat... Anyone know if the factory plug is hanging out in the harness somewhere? Or are we looking at having to do some creative wiring?

    Feel free to discuss. lol

  2. #2
    Join Date
    Feb 2010
    Location
    Memphis,TN
    Posts
    41
    So..... nobody has changed seats or done anything other than the old worn out stockers?
    Bueller?

  3. #3
    Join Date
    Aug 2012
    Location
    Mount Pleasant, Tx
    Posts
    252
    I have Kirkey Pro Streets.
    2000 GMC Sierra 1500 RCSB 2wd - 454 LSX powered drag truck...

  4. #4
    Join Date
    Jan 2008
    Posts
    1,550
    I have kirkey pro drags

    04 RCSB 5.3, Homemade 80mm FM, TU1, TH400

  5. #5
    Join Date
    Nov 2007
    Location
    THE MEAN STREETS OF OKLAHOMA
    Posts
    11,120
    Stock lol
    THEY CALL ME G.

    AZRAEL

    2017 RZR 1000 2 SEATER
    2023 RZR 1000 XP 4
    2008 LTZ DURAMAX 3500
    2023 300S 5.7
    2023 BUICK ENCORE[/B]

    The difference between winning and losing, is having a 2nd stage.

  6. #6
    Join Date
    Mar 2011
    Location
    Gibbstown, NJ
    Posts
    685
    I had heated leather seats in my 01 ECSB, I swapped them for 06 Tahoe heated leather seats, much better condition, anyways the seat plugs and seat belt sensor wires and connectors are different, the heated seat module is also different. If you want factory heated leather your need ALL the parts from the donor vehicle, IE door panel controls, buttons wire harness and connectors to simplify the swap, the floor holes and brackets are the same from all the years, I you want just plain powered leather seat the seat only needs a power and a ground for full operation. Btw make sure that the seats module board works in the donor before you swap it into yours or you will
    Be playing a guessing game trying to figure out why your seat doesn't work. If you want aftermarket seats, recycle your old seat brackets or buy a wrecked set of truck seat brackets and make them work

  7. #7
    Stock with head rests removed. 2 lbs each lol

  8. #8
    Join Date
    Feb 2010
    Location
    Memphis,TN
    Posts
    41
    I wish I could run some kirkey seats. I think the wife would frown, and i'm not even close to fast enough for those yet haha.

    Probably gonna just steam clean the hell out of the stockers for now and try to find some later model replacements.

  9. #9
    Im running 2002 olds intrigue full power buckets in my 90. Welded up some Frankenstein seat brackets for them to drop in.


  10. #10
    Join Date
    Jun 2011
    Location
    Rogers, Ar
    Posts
    51
    What did you do about seat belts?
    Last edited by Oldspimp; 09-28-2013 at 08:29 PM. Reason: spelling

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts