70mm master power

[LSXRanger]

Yea the sticky gave me an idea of what it will do, but your answer helped norrow it more. I'm only gonna change the intake on the 4.8, to an ls7 I think. My buddy is giving it to me off his ctsv. I picked up a cheap high mile 5.3 that I'm going to build up over time.

[farmtruc]

just make sure the intake ports match. not to be picky, but the 4.8L, LS7, ctsv comment you made may not match up, unless you're just spouting stuff off like i do and don't really care if it makes sense lol.

[LSXRanger]

Lol, he's giving me the intake so I figure if the ports match its a win. I'm also a converted ford guy some this LS stuff is still fresh to me lol. I checked out your truck on youtube and that this is sick man!

[LSXRanger]

Got some questions on waste gate and blow off valve. Whats the best bang for the buck? What size should I run with this 70mm turbo? I've been doing research but seeing alot of different answers.

[o2camaross]

They never put ls7's in a ctsv. Unless your buddy put it on his car and is now swapping, it's not a ls7 manifold. But really there is no need for a different manifold. The stock truck will support all the power you could make with that 70mm. What are your plans for the hot pipes?

[farmtruc]

i'd get a 40mm, we use Turbosmart, they are solid wg's. should work fine on your setup.

best bang for the buck, not sure, i quit buying the "budget" wg's.

thx on the truck comment,

[LSXRanger]

They never put ls7's in a ctsv. Unless your buddy put it on his car and is now swapping, it's not a ls7 manifold. But really there is no need for a different manifold. The stock truck will support all the power you could make with that 70mm. What are your plans for the hot pipes?

Its the stock intake off the ctsv, I thought he said ls7 could be wrong lol. He's going aftermarket and is just gonna give it to me I'm just gonna hold on to it for another motor. I'm putting this setup in a '97 Ford Ranger, gonna have to built my own manifolds. Cross over pipe from the driverside to the passengerside to a t4 flange, if thats what you were asking. I'm new to the turbo scene.

i'd get a 40mm, we use Turbosmart, they are solid wg's. should work fine on your setup.

best bang for the buck, not sure, i quit buying the "budget" wg's.

thx on the truck comment,

Thats what I've been reading about the wg's not to skimp on a cheap one, thanks I'll check them out. There's a "farm truck" here in Jersey '68? C10 5.3 Turbo, nothing like having a fast truck!