Welding a steel nut to it will work just fine. I had the same issue on the same bolt. All I did was weld a little nugget ontop of the brokenbolt first, then placed the nut over it, and filled the center of the nut with weld. Came right out and the weld wont stick to the head since they are aluminum.
Silverado Z71 10" Lift COMPLETE 6.0/4L80E PRC 2.5 Ported LS6 Heads 228r Comp Cam 3200 CIRCLE D Stall LS7 Lifters ARP Bolts SLP Oil Pump and Double Timing Chain 160 T-Stat 3" SLP Loudmouth Electric Cutout Walbro 255 Pacesetter Longtubes MSD Starter NELSON Harmess NELSON Street/Strip Tuned ECM MSD Wires LS1 Throttle Body Braided Lines Spectre CAI 4.56 Gears Detroit Locker 14 bolt http://www.ls1truck.com/forums/lsx-t...wap-build.html
Posting Permissions
Reply With Quote