wheel speed sensor and brake booster delete

[Frenchy]

Hydro boost looks a lot cleaner than the booster, plus still having power brakes just maybe make up some nice stainless lines. If you delete ABS you can delete the wheel speed sensors.

[jansen]

Thanks frenchy ! I forgot about hydro boost, just found a write up on how to do it over on pt.net. do you know anything about deleting all the trans wiring ?I know the prdnl switch has to be in park to crank, but is there a wire I could tie into and make it think that its in park?

[ecld_07]

If you delete tranny wiring what's your plan for reverse lights?

[farmtruc]

the pcm can run the efans based on coolant and a/c line pressure.

[jansen]

Not really concerned with reverse lights since the truck will see very little street time (race truck! Lol). All ac components have been removed except for the wiring. Any reason I can't use the 12v wire for the ac system to trigger a relay to turn the fans on when I press the ac button?

[farmtruc]

As long as the relay is fed the correct signal it'll work.

[George C]

my truck has no auto wiring in it anymore...need a few wires from harness and your good least in my case...a th400 you could techincally ditch it all then.....you can also get a hot rod harness