-
Standard carb pressure, around 6 psi I believe. Do you have a model number of the one you have been using? Thanks!
-
Think I've found a solution. Overkill? Maybe. But I don't think I can go wrong with this baby! http://www.jegs.com/i/Aeromotive/027/13204/10002/-1
-
I use http://www.jegs.com/i/Aeromotive/027/13110/10002/-1. But the one you posted looks just fine. And will be way less ghetto then multiple regulators
Slowest in Oklahoma...
-
Eric the one you posted is 3 to 15 pounds and will work fine for the carb, but will have to be changed when you go fuel injected.
-
Some models offer a low psi spring for carbs and high psi for efi that can be swapped easily
Slowest in Oklahoma...
-
How soon do you need the regulator? I have a LG regulator that used to be on my carb setup. $30 and it is yours.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
Reply With Quote