-Tyler 2000 ECSB-370-Vic Jr-FAST 4150-244/248 .612/.615 112 lsa
sounds nice Tyler, should run very well, digging the cam, damn near the same as mine![]()
what made you go dome piston? instead of maybe -2 or -3 fatttops with .052 mill ls9 gaskets ? was it cause the heads were already milled .040 ? just currious thats all, my compression is pretty damn close to yours at 11:9
Simple: 408 on steroids!
single digits coming soon!
I was just wanting high 11 compression ratio. My heads were milled .030 and needed another .010 off when surfaced and had them checked and were 64cc chambers. I used the ls9 gaskets.
Heres how I figured mine. +cc you actually use a -. and wiseco pistons are 0 deck.
![]()
-Tyler 2000 ECSB-370-Vic Jr-FAST 4150-244/248 .612/.615 112 lsa
Btw skeet what is your cam?
-Tyler 2000 ECSB-370-Vic Jr-FAST 4150-244/248 .612/.615 112 lsa
Sounds nice!
4.8 FBO-PULLEY 228/228 CAM 4.10 GEARS TUNED BY NELSON...JUST CRUSUIN SAN ANTONIO!
sounds wicked