Ok so the other day i posted about switching from an 80e to 60e tune. well anyways some crazy crap happened ill give the full run down truck is a 2001 rcsb, with a 2005 6.0 stock, could only get it to turn over but never run,but the tune we were using was for my old 5.3 with an 80e and everything was different, so i pulled the file off my 4.8L stock tune, change every variable even swap it to the 60e and put all those numbers the same so that the 6.0 has stock everything tune on it, went to flash the tune, about halfway thru the batt dies, truck wont do shiz, turn on the key and just the TB accuates, we unplug the battery for about a day and a half, hook up some jumper cables flash the tune in truck fires up smooth idle, it sounds perfect, and i mean perfect just like a stock truck should, i get back in the truck and push the gas pedal, and it just stopped, no sputter no hiccup just shutoff like i killed it, that was a week ago, and i cant figure it out, all that happens is the TB accuating no fuel no nothing, and when i hook up HPT it runs about halfway thru the tuning process and says boot loader failed or some crap.
anyone have any clue what the hell happened or what i did?????