OBS to LSx conversion

[chevy_addicted]

What about the oil cooler lines? Will they bolt to the 96-98 truck radiator? I haven't read or heard anyone say anything about these.

[RPM Graphics]

i would think the line would work. i put an 02 F-body 4l60e in my 96 & i used my 96 lines, just had to bend them a little to fit. the angle they go into the trans is a little different.
i know you're talking about a truck trans but if the f-body is the same i would think the newer truck is the same.
my 96 also has 2 sets of holes. i actually used the forward set on one side & the rear set on the other & my trans lined up perfect in the center. if i would have used both rear holes it would fit but the trans mount stud was all the way against the front of the cross member.

[chevy_addicted]

i would think the line would work. i put an 02 F-body 4l60e in my 96 & i used my 96 lines, just had to bend them a little to fit. the angle they go into the trans is a little different.
i know you're talking about a truck trans but if the f-body is the same i would think the newer truck is the same.
my 96 also has 2 sets of holes. i actually used the forward set on one side & the rear set on the other & my trans lined up perfect in the center. if i would have used both rear holes it would fit but the trans mount stud was all the way against the front of the cross member.

You know,I didn't give enough info on that post. I was referring to the engine oil cooling lines. I want to adapt the 6.0 oil cooler lines to my 97 radiator. The 350 vortec I'm about to pull because it developed a knock came with the oil cooler.