My 92 6.0 Build

[DRAGGIN95]

I would like to see more pic's of your AC bracket, it look's like the original 95 passenger side serp. bracket, if it is how did you do it?

[Mickeymotormount]

The bracket is the original bracket from the 350 small block.

Well it took awhile to find the link on the article, but here it is.
http://67-72chevytrucks.com/vboard/s...d.php?t=510656

The only problem I had was that the tensioner was in the way of the noise baffle on the intake tube. I removed it and siliconed a plug in the hole. I also had a small issue with belt alignment but remedied that with some minor tweaking.

[DRAGGIN95]

Awesome, thank you for that link!

[Mickeymotormount]

Glad to help out!!!

[fabunlimited]

I used the 99 ls1 temp sensor in the front drivers side had.It has three wires 2 go to your new pcm and one goes to your gauge.Some people say it doesn't read correctly on there gauge but mine works perfect in my 1992 pickup.Where are you located? I am interested in the tailgate.
Hre is the one i used http://www.hawksthirdgenparts.com/pr...onversion.html
I didnt like having the adapter and temp sensor in rear passenger side head because it made putting the plug in #8 cylinder a real pain in the a$$
Joe

I looked at link and called them they couldnt tell me what wires go to the ecm and what one goes to the gauge??????????????How did you wire yours?Dont want to order it if I dont how to wire it.

[gagliano7]

http://www.ls1truck.com/forums/lsx-t...or-wiring.html Here is the wiring in this thread and i am pretty sure the diagram comes with the sensor.