Help with preparing for a swap

[edwinl16]

well i picked up the motor today just had some more questions i got one out of a '02 tahoe. this one came with Electronic throttle should i swap over my intake and fuel rail with throttle body or what would i need to do to run it with drive.wire.
>






ill get more pictures if yall would like just tell me what you would need to help me out.

ALso got one with #862 casting heads are these any good im not sure what i have on my other LM7

[Frenchy]

Swap your throttle body over.

[edwinl16]

didnt think of that man, thank you

[edwinl16]

okay well today is the swap day, got started on it this morning

the intake is off evrything is in the clear tomorow were going to cut the exhaust between the cats and the manifold we couldnt get the bolts undone(if you have any suggestions that would be great)

i had a question about my intake, my orginal trucks intake looks cleaner and all around better than the donor motor
the problem is my truck had EGR on my donor it doesnt the manifold comes blocked off, what would i need to delete the EGR system from the intake just swap over the block offf plate from the donors onto mine and leave the connector ffrom the harness hanging or what would be the best thing to do in this situation?
(keep in mind after the motors in i plan on doing LT's,Cam,And all them goodies)

if anybody has any suggestions that would be great .