While at the track my truck had a real bad wheel hop so I had to get off the throttle AND get back on.I manage to still run a 13 flat. Any ideas on a solution. It's my DD
While at the track my truck had a real bad wheel hop so I had to get off the throttle AND get back on.I manage to still run a 13 flat. Any ideas on a solution. It's my DD
Pinion angle in check, and spring clamps. If that doesn't work, try adjustable shocks, still hopping get some traction bars.
Tried to do that list cheapest to most expensive, if you can build your own bars, just get your driveline angles right and build a set of bars.
2006 SilveradoLittle Black Bitch
what is the correct way to clamp the springs? i havent been able to get a clear answer on this yet
2005 GMC RST *sold
2006 Silverado SS with nawz
about 15 inches behind the axle. it may lower a tad but it helps.
4link
+1 On the pinion angle... fought that battle before.Originally Posted by Frenchy
2002 Chevy Silverado 2500 HD. CAI, 4.10's, 35x12.50 r17 Kumho Road Venture M/T's. Nelson Tuned.
2002 Z28 Camaro- Small budget cam build. Full bolt on, Custom grind Comp Cam, LS6 intake, 4000 CircleD stall, Nelson Tuned.
2008 Dodge 2500- H&S MiniMax, CAI, DPF delete, EGR delete, AirDog fuel system.
Posting Permissions
Reply With Quote
