+ Reply to Thread
Results 1 to 10 of 16

Thread: Running New harness thru obs firewall?

Hybrid View

  1. #1
    Join Date
    Apr 2011
    Location
    East Texas
    Posts
    508
    I wont need ABS, A/C, or my factory speedo. Will my power windows and headlights still work?

  2. #2
    Join Date
    May 2008
    Location
    Round Rock, TX
    Posts
    3,069
    All of my wiring runs through this grommet behind the intake..PCM and relay boxes are mounted under the dash..


  3. #3
    Join Date
    Jan 2007
    Location
    Lewisville,TX
    Posts
    94
    That looks so clean! I just may switch to that. What about the wires from the c100? Did u route them back into the cab also, where?
    95 Chevy, bagged and bodied, LSx swap/detail in progress

  4. #4
    Join Date
    May 2008
    Location
    Round Rock, TX
    Posts
    3,069
    I got rid of the c100 plug and any wire that wasnt used. The tail light harness comes out under the drivers side floor board. The only wires that come from the driverside forward are the headlight stuff.

  5. #5
    Quote Originally Posted by DBRODS View Post
    All of my wiring runs through this grommet behind the intake..PCM and relay boxes are mounted under the dash..

    now thats wut u called hidden wires. need that in my truck. how much

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts