One word of advice I can give you is, don't cut any wires or remove the old computer until you see everything working correctly. I'm keeping my 95 computer because of the abs,ac, speedometer.
One word of advice I can give you is, don't cut any wires or remove the old computer until you see everything working correctly. I'm keeping my 95 computer because of the abs,ac, speedometer.
I wont need ABS, A/C, or my factory speedo. Will my power windows and headlights still work?
All of my wiring runs through this grommet behind the intake..PCM and relay boxes are mounted under the dash..
That looks so clean! I just may switch to that. What about the wires from the c100? Did u route them back into the cab also, where?
95 Chevy, bagged and bodied, LSx swap/detail in progress
I got rid of the c100 plug and any wire that wasnt used. The tail light harness comes out under the drivers side floor board. The only wires that come from the driverside forward are the headlight stuff.
now thats wut u called hidden wires. need that in my truck. how muchOriginally Posted by DBRODS
All of my wiring runs through this grommet behind the intake..PCM and relay boxes are mounted under the dash..
Posting Permissions
Reply With Quote
