My "mexico" was recently repaved and I'm looking for something that will hook on it.
My "mexico" was recently repaved and I'm looking for something that will hook on it.
These for max traction
http://www.jegs.com/i/Hoosier/522/17...rentProductId=
These for great traction and a little more tread for the occasional wet driving
http://www.jegs.com/i/BF-Goodrich/13...rentProductId=
And these for better than street tire traction, best wear, and good wet traction
http://www.jegs.com/i/Nitto/726/4028...rentProductId=
04 RCSB 5.3, Homemade 80mm FM, TU1, TH400
I've heard some good things about M&H tires, I think DBRODS runs them and said they hooked better than the other set he had..
Run your motor, not your mouth..
04 ECSB 5.3 Sierra: 14.6@95
Pacesetter Headers, Intake, Tune
yea I've heard good things about them too. I just didn't post them bc they were a little more expensive, about $265 each. MT also makes a 325/50/15
04 RCSB 5.3, Homemade 80mm FM, TU1, TH400
Check out Centerline Split Spoke, they favor the Bogart D-10's but at almost half the cost.
Here is a picture of my Split Spokes.
Mickey Thompson ET Street Radials is the best hooking tire your going to find for the street but they wear fast.
Great info on drag radials:
http://www.stangtv.com/tech-stories/...-drag-radials/
Last edited by jmgak47; 11-12-2012 at 01:03 AM.
2000 GMC Sierra 1500 RCSB 2wd - 454 LSX powered drag truck...
more info on the wheels!!! How much was a whole set? And do they come in 6 X 5.5?
04 RCSB 5.3, Homemade 80mm FM, TU1, TH400
Roughly $1300 shipped. I had to do a 5 lug swap because they only come in 5 lug.
http://centerlinewheels.com/wheels_d...=117&sw_id=950
2000 GMC Sierra 1500 RCSB 2wd - 454 LSX powered drag truck...