the cab is lifted/tilted back about 8" so the steering shaft is currently disconnected. notice the wood blocks between the frame and cab. I hope to put the coil packs in the OEM location. we will see what the clearance looks like once i install the trans and drop the cab back down.
old mod list: H/C/I/N/E/G 408
new mod list: 5.3, gears/posi, mufler and tune : (
very nice project. I dont like the way those headers have two tubes going outside the frame rails, as tire clearance get to be an issue, but otherwise should be a sweet little truck.
Im in the finishing stages of a 96 S10 Ext cab with a 408 T56 swap, stock 8.5 rear with a true track and 4:56 gears. Nelsons did the tune, but im currently having some issues with the LTFT being pegged at 25%.
Posting Permissions
Reply With Quote