have a build thread anywhere? i originally wanted a first gen but couldnt pass this truck for the price/condition.
have a build thread anywhere? i originally wanted a first gen but couldnt pass this truck for the price/condition.
old mod list: H/C/I/N/E/G 408
new mod list: 5.3, gears/posi, mufler and tune : (
Yeah i aint seent too many first gen s10 lsx swaps. I have one and benn thinkin about it.
4.8, TSP 220, 6L90 swap, 3400 Stall, 4.10s w/30" drag radial and T76 @ 16lbs.
Best ET 11.54@114 w 1.52 60ft
Raceweight 4905 lbs.
I've always wanted to do this. looks awesome!
little progress today.
old mod list: H/C/I/N/E/G 408
new mod list: 5.3, gears/posi, mufler and tune : (
It's hard to tell, do you have the steering shaft hooked up and how well does it clear? Where are you planning to mount the coil packs? Looks good sitting in there!
the cab is lifted/tilted back about 8" so the steering shaft is currently disconnected. notice the wood blocks between the frame and cab. I hope to put the coil packs in the OEM location. we will see what the clearance looks like once i install the trans and drop the cab back down.
old mod list: H/C/I/N/E/G 408
new mod list: 5.3, gears/posi, mufler and tune : (
very nice project. I dont like the way those headers have two tubes going outside the frame rails, as tire clearance get to be an issue, but otherwise should be a sweet little truck.
Im in the finishing stages of a 96 S10 Ext cab with a 408 T56 swap, stock 8.5 rear with a true track and 4:56 gears. Nelsons did the tune, but im currently having some issues with the LTFT being pegged at 25%.
Posting Permissions
Reply With Quote
