I ran a 325 50 15 and it sat flushed
I ran a 325 50 15 and it sat flushed
it really depends on the backspace of the wheels. those don't look like any Intro's i've ever seen. i see the valve stems are on the backside but Intro's it will be behind one of the spokes, not in between 2.
i could be wrong, but i would send that pic to intro & ask before i bought them as intro's.
Last edited by RPM Graphics; 10-18-2012 at 03:27 PM.
^^ BS is the main thing. Im running 15x10 with 6.5" BS and 325/50/15 nitto 555r's. They stick out about 1/4-1/2 inch. 325/50/20's will be tall!!
04 RCSB 5.3, Homemade 80mm FM, TU1, TH400
I'm gunna send a email off to intro and get them to authentic them. I've already purchased them. I paid 600 bux for them so intros or not, it was a good deal. They replace my ugly other ones, and are way lighter ! They also came with nitto tires, 2 of which I can use so I basically got them rims for free as the 2 tires are more then 600 for the pair hear in Canada.
02camaross - yea the 325/50 is almost 33 inches tall and 13.5 wide. I swapped them out for 275/45s. Think I may put some 295/50s on it in the spring.
Mike
2000 GMC rcsb...soon to be cammed, sprayed, and 80E'd
1994 GMC K1500 4.3, 5speed some lift and 33's DD
Posting Permissions
Reply With Quote
