I have a 2002 silverado 1500 and it has the clutch fan and I just bought the factory fans and shroud and harness and I need to know how to wire them into my fuse panel under the hood
I have a 2002 silverado 1500 and it has the clutch fan and I just bought the factory fans and shroud and harness and I need to know how to wire them into my fuse panel under the hood
Search button is your friend. Pretty good info out there. Did you get the 05+ setup?
Slowest in Oklahoma...
What harness did u get ? Easiest thing is to get Nelson harness, comes with all detailed instructions and easy to do.
A harness from a 05 will need to be modified to work on a 99-02 truck. Also there is much better options than the Nelson harness.
The Fleet...
2003 Suburban- 5.4 L59 331CI 10:5.1 Compression -Built by ME
2004 Avalanche- 5.7 LS1 -NOT built by me
2005 Silverado RCSB- 5.7 LS6 -Built by ME
Oh really? Why dont you enlighten us on better options? The nelson harness is about as plug and play as a harness could possibly be and its not super expensive either.Originally Posted by TXSZ66AVLANCHE
Anyone notice he said that only fans, shroud and harness was bought....kinda hard to put that on a 28in radiator...also your PCM will need tuned to turn on those pins
Not trying to start a ruckus, just saying there is options with better quality and for cheaper. Check eBay item 261072252444
The Fleet...
2003 Suburban- 5.4 L59 331CI 10:5.1 Compression -Built by ME
2004 Avalanche- 5.7 LS1 -NOT built by me
2005 Silverado RCSB- 5.7 LS6 -Built by ME
The truck they came off is a 05 v6 and I got the fans and the shroud they are attached to and the complete front lighting harness that the fans are plugged into and I was told by my two local tuners I really don't need the harness I have to give power to the fans and then run a wire to the PCM an have it tuned what temps to turn on and I haven't really seeker this out further and the shroud looks to be the same size as the shroud that I will remove with my clutch fan
Nelson performance did all the tuning and fan set up on my 2000, Erica is very in tuned on what she is talking about. I went threw the what will work thing on mine. Iv had 0 problems or regrets, what u have may work but your still over invested n the set up. Nelson does this for a living not a sell.
12.08's......sounds like a fair race
2001 ECSB Z-71: 7.0L LS7, Kook's LT's, True Duals, RPM Tune, F.A.S.T. Intake/TB, YANK TT3000, 4:10's, G80, AWD Swap, 160-Stat.....
Slowest in South Jersey..........SOLD :-(
2012 GMC Sierra Z71 CC: 6 Speed, 3:73's, G80, Back up DD...........SOLD
2000 RCSB Shitbox.......370LSx/Built 60e/4.56's,EATON Posi, CAI,3" SLP Exhaust, DD.......Build Thread http://www.ls1truck.com/forums/my-ga...ker-punch.html
Posting Permissions
Reply With Quote
