1996 5.7 to 2002 6.0 wiring need diagrams

[LS1GMCTruck]

For a 1996 truck, all you need to do is make the new engine a stand-alone install, wiring wise. Its pretty straight forward. You can easily hook the few wires from the stand-alone into the existing '96 power center(fuse block). All you need is the C-100 connectors pin-outs/wire colors. The C-100 connector is the black plastic port(group of wires) that exit the firewall in front of the driver, in the engine compartment. That, and the power center fuse/wire diagram thats in your trucks owners manual.

[therealvarner]

ur rigth the c100 connectors diagram is what im looking for unfortunatly i never got a owners manual for my truck, ill check alldata at my old work maybe it will have it thanks for all help and help in advance

[mattc]

i tried all this on my 97 swap, after alot of cussing and countless hours of staring at wiring diagrams i said it and bought one from Nelsons! lol

[Mickeymotormount]

Not sure if I can help but I have a '94 wiring diagram schematics book and a '99 GM service manual. They were helpful for my 6.0 swap in my '93.

[snowbound98]

Just in case you still need firewall pin outs I have some for a 97 K1500. 350 vin R. Hope this helps.

[RPM Graphics]

i have diagrams in my build thread. the link is in my signature.