The only other thing I can think of is I know Jansen you mentionedI dont know where that sensor is at but if its oil level I would think its possible you had a drainage problem since its trying to push against fluid?I removed my oil level sensor in the pan and routed my return line into it. No issues here.
Last edited by Gus; 09-04-2012 at 04:10 PM.
2010 Silverado 4.8 Ext Cab 4x4
Cam, Stall, 4.88's
I have seen it mentioned that high oil pressure can blow the seals on this turbo.
ECSB 2kSierra 2wd 4.8L-K&N-HPtuners-Calspeed LT's-Magnaflow-Tahoe20's-HankookRH06
waiting to go in... 3.90s, 214/220cam
Kinda hope it is the turbo, 4 bolts and its out. I've had a few turbos apart and they're pretty simple. I think I would try rebuilding one if that's what the prob is.Originally Posted by kerrige
Where are you from Jansen?
2010 Silverado 4.8 Ext Cab 4x4
Cam, Stall, 4.88's
I've never had any oiling issues yet.... this may be the first. If this rain will slack off I'm gonna start tearing stuff apart
Today.
Posting Permissions
Reply With Quote