Look on your door jamb for the factory size tire and wheel that came with the truck......the label will also include load rating.
Look on your door jamb for the factory size tire and wheel that came with the truck......the label will also include load rating.
2001 ECSB Z-71: 7.0L LS7, Kook's LT's, True Duals, RPM Tune, F.A.S.T. Intake/TB, YANK TT3000, 4:10's, G80, AWD Swap, 160-Stat.....
Slowest in South Jersey..........SOLD :-(
2012 GMC Sierra Z71 CC: 6 Speed, 3:73's, G80, Back up DD...........SOLD
2000 RCSB Shitbox.......370LSx/Built 60e/4.56's,EATON Posi, CAI,3" SLP Exhaust, DD.......Build Thread http://www.ls1truck.com/forums/my-ga...ker-punch.html
well i got them mounted and balanced with a 235/75 i got a set for 130 mounted and balanced just needed them till december or so,
but i didnt like how they looked though they look tiny on my truck so im saving up to buy 255/70 BFG Rugged Trail and getting a leveling kit and most likely a Locker since its 2WD With No G80
Valuetrac/4.10s FTW!!! You won't need a leveling kit for that tire. It's only a hair over 30" tall. If you are wanting a more off-road rugged look I would go with at least a 31-32" Tire. Some guys even run a 33" tire with only a leveling kit. I would also go with BFG Mud terrains or the equivalent from General Tire.
ECSB 2kSierra 2wd 4.8L-K&N-HPtuners-Calspeed LT's-Magnaflow-Tahoe20's-HankookRH06
waiting to go in... 3.90s, 214/220cam
stock size on mine is 265/75 16. But in the past i had 285 and a 305 on there. I think they made the truck look better with how much wider they were than stock. and they both were an at style tire.
if you could get me a link to the valutrac that would be great,, leveling kit is more of a look thing i hate how its leaning forward put new gas monroe shocks all around thought it would pick it up a bit but no luck, so going with the 2.5 to 3.. What size would the 32 be?
One more question Is $500 A fair price on Labor+Parts on the leveling kit?
Will the 03-06 2WD Leveling kit fit mine? many websites only carry 03+
Yup they fit
I went from a 16 to a 17 inch Mickey Thompson Sidebiter..Im running 285/70/17 on a 2003...It does have a leveling kit but I only needed about 1 1/4 inches to level...The M/T sidebiter B wheels have a 0 offset...5 inch back space...if you look on the net it says they wont fit..They actually fit good..about 1 1/2 inch out past the fender.....and that's with 285's
Last edited by Florida on the water; 06-29-2013 at 04:33 PM.
If you do what you've always done. You get what you always got!!!!
No rubbing or cutting...
If you do what you've always done. You get what you always got!!!!
The truck came with 16 inch rims on a 4x4....I having a little trouble with photobucket...let me try again
If you do what you've always done. You get what you always got!!!!
I switched to the Nitto terra G tires...The ride is best it's ever been...even with the leveling...
If you do what you've always done. You get what you always got!!!!
Posting Permissions
Reply With Quote
