4L60E no 2nd gear

[jansen]

If you have access to a car lift you do what duct said and leave the two bolts on the side of the housing . Put a 55 gallon drum under the trans, lower the truck down until the trans is sitting on the drum. Now remove the last 2 bolts, slide trans back and raise the truck back up with the lift. That's how I do it by myself.

[scottyd2506]

update !! Trans working and hooked up. Sunshell was broke, had them put in beast shell, heavy 2-4 band, heavy 4rth clutch pack etc with rebuild kit..

New problem. it goes into all the gears right, but the indicator does not work right, neutral shows park, etc, starts in park and drivel. but not neutral, 3rd, 2nd or 1st (and reverse). Reverse light does not come on, only in neutral the light comes on.