I cleaned everything up, drove around, checked and nothing other than tiny bit from the vent tube. Checked fluids and seals and everything good so far. Thanks man
I cleaned everything up, drove around, checked and nothing other than tiny bit from the vent tube. Checked fluids and seals and everything good so far. Thanks man
Do you mean where the driveshaft goes into the transfer case? If so make sure you clean any corrosion off the yoke before you put it into the new seal or the rust will tear the new seal.
2000 Chevy Silverado RCSB LS6 5 speed, LS6 short block, 317 heads, LS6 intake, Lunati 220/224 .575/.575 112LSA cam, Edelbrock Headers, CTS-V accessory drive, Nelson Performance Custom Tune.