Had the same problem, shortened mine about 1.5-2" buy cutting a chunk out and re welding
Had the same problem, shortened mine about 1.5-2" buy cutting a chunk out and re welding
Silverado Z71 10" Lift COMPLETE 6.0/4L80E PRC 2.5 Ported LS6 Heads 228r Comp Cam 3200 CIRCLE D Stall LS7 Lifters ARP Bolts SLP Oil Pump and Double Timing Chain 160 T-Stat 3" SLP Loudmouth Electric Cutout Walbro 255 Pacesetter Longtubes MSD Starter NELSON Harmess NELSON Street/Strip Tuned ECM MSD Wires LS1 Throttle Body Braided Lines Spectre CAI 4.56 Gears Detroit Locker 14 bolt http://www.ls1truck.com/forums/lsx-t...wap-build.html
That's what I'll have done to mine tomorrow,, glad to hear I'm not the only one with this problem,,, thanks for the infoOriginally Posted by HPICamaroSS
I was having the same problem with my 1990 so I thank you for asking that question 1991ssp, and also thanks for the solutions!!
Forgot to congratulate you on getting your swap running. Congrats! I'm a bit behind you in my progerss but I'm learning alot from your threads.Keep up the good work.
Ask a question anytime you need help, this site has been a huge help, only way one knows what to to is ask, someone here will be glad to help, I cut 1.5 inches out of my linkage today and had it re-welded, just make sure to cut it on the first straight part , do not forget to scribe a straight line on it so that you do not get the rotation out of place
Thanks for the congrats, you will have you'rs running soon, I'm finishing up my 4/6 drop, then I have to wait on the pieces for my air intake, upper radiator hose, coolant and exhaust is about all I like being finished
Last edited by 1991SSP; 07-13-2012 at 07:18 PM.
Yup exactly what he said, otherwise if its slightly twisted one way or another it throws the geometry way off and wont shift good when going from park to drive
Silverado Z71 10" Lift COMPLETE 6.0/4L80E PRC 2.5 Ported LS6 Heads 228r Comp Cam 3200 CIRCLE D Stall LS7 Lifters ARP Bolts SLP Oil Pump and Double Timing Chain 160 T-Stat 3" SLP Loudmouth Electric Cutout Walbro 255 Pacesetter Longtubes MSD Starter NELSON Harmess NELSON Street/Strip Tuned ECM MSD Wires LS1 Throttle Body Braided Lines Spectre CAI 4.56 Gears Detroit Locker 14 bolt http://www.ls1truck.com/forums/lsx-t...wap-build.html
I know the biggest thing killing me right now is I'm anxious to drive it!! I know it's gonna be a HUGE difference after driving the truck for thousands of miles with the 4.3 in it
Posting Permissions
Reply With Quote