LS1 fan swap ?? Relay hookup

[TRPLXL2]

I appreciate the reply guys, but I managed to figure it out tonight after another 4 hours of troubleshooting.. Basically the instructions that Ron Francis gave with their relays sucked, following those Is why I couldn't get it to work. I ended up following a chart off of LT1swap.com, I basically ignored colors and just ran with following numbers of the relay. First attempt and they work, so I soldered them up and made some adjustments in HPTuners and they're good to go!! Here's how I wired them for future reference:

terminal 30-87a (jumper wire connecting the two)
terminal 30 & 86 (battery + 25 amp fuse)
terminal 85 (ecm signal wire)
terminal 87 (+ cooling fan)

I just grounded the fans to the battery, and presto!!!

[George C]

if you click the link i provided it is a diagram of how the relays are wired

I appreciate the reply guys, but I managed to figure it out tonight after another 4 hours of troubleshooting.. Basically the instructions that Ron Francis gave with their relays sucked, following those Is why I couldn't get it to work. I ended up following a chart off of LT1swap.com, I basically ignored colors and just ran with following numbers of the relay. First attempt and they work, so I soldered them up and made some adjustments in HPTuners and they're good to go!! Here's how I wired them for future reference:

terminal 30-87a (jumper wire connecting the two)
terminal 30 & 86 (battery + 25 amp fuse)
terminal 85 (ecm signal wire)
terminal 87 (+ cooling fan)

I just grounded the fans to the battery, and presto!!!

[TRPLXL2]

Currently I have no AC setup, so that Is why I didn't setup the 3 relay setup. I think we are going to do Vintage air down the road next year, they're gen 3 Sanden setup is very nice. Prices where I'm at are ridiculous for the LS1 stuff, and used ac compressors go for about $150. I do appreciate the help though....

[George C]

Currently I have no AC setup, so that Is why I didn't setup the 3 relay setup. I think we are going to do Vintage air down the road next year, they're gen 3 Sanden setup is very nice. Prices where I'm at are ridiculous for the LS1 stuff, and used ac compressors go for about $150. I do appreciate the help though....

ill have a truck ac compressorr and bracket for sale if you need it. from a 00 motor setup.....yes truck ac will work with fbody accesories, you just need to enlongate the holes on the bracket some.