cause it looks better and all the gauges will work without a bunch of hassel of dual sensorsOriginally Posted by Lextech
cause it looks better and all the gauges will work without a bunch of hassel of dual sensors
What PCM are you going to use? If it is an LS1b PCM---It will run the engine and dash without dual sensors.
Jeff
98 GMC RCSB 2wd, 100% internally stock 305, w/twin T-3 junkyard turbos,Ramjet intake w/42lb inj,12200411 PCM. 4675lbs w/me in it. Best time in 5 passes 13.01@110
i have the stock pcm from a 2002 chevy 2500 truck that i got with my motor.
That PCM will run your engine, trans, gauges perfectly without dual sensors. That PCM has been in my 98 truck for 6 years now.
Jeff
98 GMC RCSB 2wd, 100% internally stock 305, w/twin T-3 junkyard turbos,Ramjet intake w/42lb inj,12200411 PCM. 4675lbs w/me in it. Best time in 5 passes 13.01@110
i know it will run the engine and trans they are from the 2002 truck as well. i was under the impression that i had to have dual Temp and oil pressure sensors and a resister for the Tach to make the gauges all work right. since the 02 computer needed the 02 water temp and 02 oil pressure sensor for it to work right.
Posting Permissions
Reply With Quote